Strenx® 900 is a group of high-strength structural steel grades with yield strengths between 830 and 900 MPa (120-130 ksi) depending on thickness, making them an excellent choice for transport, lifting, agriculture and other load-bearing applications.
Order trial material Get free technical adviceSUITABLE APPLICATIONS
Advanced load-bearing structures in transportation, lifting and agriculture
TYPE OF PRODUCTS
Hot rolled plate and sheet
THICKNESS RANGE
2-120 mm (0.079”-4.724”)
STRENX® 900 E
Superior toughness
Suitable for strong and light chassis, cranes, agriculture equipment and other load-bearing structures in a wide dimension range.
Toughness: 40 J at -40°C (30 ft-lb at -40°F)
Thickness: 4-120 mm (0.157”-4.724”)
Standard: EN 10025-6 S890QL
Format: Plate
STRENX® 900 F
Extreme toughness in cold conditions
Suitable for strong and light chassis, cranes, agriculture equipment and other load-bearing structures, particularly in cold conditions.
Toughness: 27 J at -60 °C (20 ft-lb at -76 °F)
Plate: 4-100 mm (0.157”- 3.937”)
Standard:EN 10025-6 S890QL1
Format: Plate
STRENX® 900 MC
Hot rolled steel for cold forming
Excellent thickness accuracy and surface quality for predictable performance in cold forming operations.
Toughness: 27 J at -40°C (20 ft-lb at -40°F)
Thickness: 3-10 mm (0.118”-0.393”)
Standard: EN 10149-2 S900MC
Format: Sheet and coil
STRENX® 900 PLUS
Superior bendability
Suitable for strong and light chassis, cranes, agriculture equipment and other load-bearing structures.
Toughness: 27 J at -40°C (20 ft-lb at -40°F)
Thickness: 2-8 mm (0.079”-0.315”)
Standard: EN 10025-6 S890QL
Format: Sheet and coil
“The fact that the pumps weigh less provides many advantages, like less fuel consumption, the possibility of purchasing trucks with a shorter wheelbase, and pouring concrete usingless fuel – and, of course, less fuel is consumed when you drive a lighter truck,” says Erol Yıldız, factory manager at Betonstar.
Strenx® 900 can be welded using any conventional welding method. MAG welding is the most common technique today, since it is very easy to automate for high productivity.
Strenx® 900 can usually be machined without special equipment. Stable machinery fitted with high-speed steel and carbide tools is recommended when drilling, countersinking, tapping, turning, and milling.
Free bending and roll bending of Strenx® steel plate and strip can be done using standard bending machinery. Uniform properties, close thickness tolerances and high surface quality ensure a predictable bending process.
The properties and fine surface finish of Strenx® 900 plate and sheet make it perfect for laser cutting. Thermal cutting of hot rolled Strenx® 900 is performed with oxy-fuel flame, plasma and laser.
Mechanical cutting of Strenx® 900 is best performed with guillotine shears. Consider carefully the settings of the cutting machine. The most important factors are clearance, cutting angle and blade hardness. The plate should be allowed to warm up thoroughly to around +20°C (68° F) before it is cut.
Strenx® guarantees include tight thickness tolerances, tight flatness tolerances and bending properties. The tight thickness tolerances enable you to know the weight more precisely. As a result, you can reduce your safety margins. Precise thickness within a plate and between plates makes for safe and predictable performance in the workshop.