Strenx performance steel

Strenx® 1300 E/F

Download data sheet

General Product Description

Strenx® 1300 E/F is an ultra-high-strength structural steel with a minimum yield strength of 1300 MPa.

Typical applications include load-carrying structures that place very high demands on low weight. SSAB developed Strenx® 1300 E/F for building the lightest possible steel solutions or providing an alternative to other materials. 

Strenx® 1300 E/F benefits include:

  • Superior bendability and surface quality
  • Weldability with excellent HAZ strength and toughness
  • Exceptional consistency within a plate guaranteed by close tolerances
  • High impact toughness which provides for good resistance to fractures

Dimension Range

Strenx® 1300 E/F is available in plate thicknesses of 4.0 – 15.0 mm. Strenx® 1300´E/F is available in widths up to 2900 mm and lengths up to 14630 mm depending on thickness. More detailed information on dimensions is provided in the dimension program.

Mechanical Properties

Thickness
(mmin)
Thickness
(mmin)
4.0 - 15.00.157 - 0.591
Yield strength Rp0.2
(min MPaksi)
1300188
Tensile strength Rm
(MPaksi)
1400 - 1700203 - 246
Elongation A5
(min %)
8

For transverse test pieces.

Impact Properties

Product
Product
Strenx® 1300 E
Min impact energy for transversal testing,
Charpy V 10x10 mm test specimen 1)
27 J / -40 °C20 ft-lbs / -40 °F
Product
Product
Strenx® 1300 F
Min impact energy for transversal testing,
Charpy V 10x10 mm test specimen 1)
27 J / -60 °C20 ft-lbs / -76 °F

1) Unless otherwise agreed, transverse impact testing according to EN 10025-6 option 30 will apply. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).

Chemical Composition (ladle analysis)

C *)
(max %)
C *)
(max %)
0.25
Si *)
(max %)
0.50
Mn*)
(max %)
1.40
P
(max %)
0.010
S
(max %)
0.003
Cr*)
(max %)
0.80
Cu*)
(max %)
0.30
Ni*)
(max %)
3.0
Mo*)
(max %)
0.70
B*)
(max %)
0.005

The steel is grain refined. *) Intentional alloying elements.

Carbon Equivalent CET(CEV)

Strenx® 1300 E

Thickness (mmin)
Max CET(CEV)
4.0 - 15.00.157 - 0.591
0.43 (0.67)

Strenx® 1300 F

Thickness (mmin)
Max CET(CEV)
4.0 - 15.00.157 - 0.591
0.43 (0.67)

Tolerances

More details are given in SSAB’s brochure Strenx® Guarantees.

Thickness

Tolerances according to Strenx® Thickness Guarantees.

Strenx® Guarantees meet the requirements of EN 10029 Class A, but offers narrower tolerances.

Length and Width

According to SSAB’s dimension program. Tolerances conforms with EN 10029. 

Shape

Tolerances according to EN 10029.

Flatness

Tolerances according to Strenx® Flatness Guarantee Class D, which are more narrow than EN 10029 Class N. 

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Delivery Conditions

The delivery condition is Quenched and Tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement.

Delivery requirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

Fabrication and Other Recommendations

Welding, bending and machining

Recommendations are found in SSAB’s brochures at www.ssab.com or consult Tech Support.

Strenx® 1300 E/F has bending guarantees according to Strenx® Bending Guarantees Class D.

Strenx® 1300 E/F has obtained its mechanical properties by quenching, and at our discretion, subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 200ºC. 

Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.

Show specs in:

MetricImperial