1) Please check thickness/width combinations available.
Examples of cooling media used for evaluating typical mechanical properties:
PAG polymer 10%, no agitation, T ≤ 30 °C.
Fast cooling rate quenching oil, T ≤ 35 °C.
For further information, please consult your local SSAB contact person or contact SSAB´s Technical Customer Service.
A material test certificate Type 2.2 according to EN 10204 (chemical composition) is part of the delivery.
A material test certificate according Type 3.1 according to EN 10204 (mechanical properties) can be provided by special agreement.
1) For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified typical value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).
SSAB M53 is micro-alloyed with Nb, Ti and V.
SSAB M53 is delivered with SSAB tolerances, which meet and exceed the requirements in EN 10051. Tighter tolerances are available upon request
2/3 of EN 10051.
Hot rolled sheet: -0/+20mm.
Tolerances according to EN 10051.
≤ 6 mm/1 m ruler deviation (only valid for cut to length sheets).
According to EN 10163-2 Class A, Subclass 3.
Hot rolled sheet are delivered in as rolled (+AR) condition.
Hot rolled strip products are available in non-pickled.
Pickled dry or pickled & oiled condition available upon request.
Cutting is recommended by laser or plasma, flame cutting is not advised.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.