COR-TEN® B Tube is structural hollow section with anti-corrosive properties, which minimize the need for maintenance and corrosion-prevention treatment.
It is available in circular, rectangular, square and special shapes. Customized shapes and other tailoring options are available upon request. It is typically used in advanced engineering and construction where corrosion resistance is important. It meets the standard requirements of EN 10025-5 and EN 10219 and is CE marked.
COR-TEN® B Tube is manufactured by cold forming and high frequency welding from clean, high quality environmentally friendly steel by modern and efficient tube lines.
COR-TEN® B Tube is available at circular, square and rectangular shapes.
Other shapes, sizes and lengths are available upon request.
Mechanical properties meet the requirements of S355J2W, EN 10025-5.
The mechanical properties for rectangular hollow sections are tested by SSAB on the longer side of the cross section according to EN 10219.
1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.
Chemical composition meets the requirements of S355J2W, EN 10025-5.
The steel is aluminium-killed.
CEV value meet the requirements of S355J2W, EN 10025-5.
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.
1) All external dimensions are measured with a minimum distance from the end of the section. The distance must be a minimum of 100 mm.