SSAB Laser® 355C is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.
SSAB Laser® 355C meets and exceeds the requirements of S355K2C+N in EN 10025-2. Dual certification and CE marking are available upon request.
The mechanical properties are tested transverse to the direction of rolling.
1) The bending guarantee is valid for both longitudinal and transverse direction.
All SSAB Laser® steels are aluminum-killed (Al ≥ 0.015%) and grain-refined. Additionally, niobium (Nb), vanadium (V), titanium (Ti) and/or boron (B) may be used as single alloying element or in any combination.
All SSAB Laser® products are delivered with SSAB Laser® tolerances, which means increased guarantees compared to corresponding EN standards. Detailed information is available on ssab.com.
Hot rolled sheet: SSAB Laser® tolerances correspond to 2/3 of EN 10051 as default. Tighter tolerances are available upon request.
Hot rolled plate: SSAB Laser® tolerances correspond to 3/4 of EN 10029 as default.
Hot rolled sheet: -0/+20 mm for mill edge sheet; -0/+2 mm for cut edge sheet. Tighter tolerances are available upon request.
Hot rolled plate: -0/+4-10mm depending on the thickness.
Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.
Hot rolled sheet: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.
Hot rolled plate: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.
According to EN 10163-2 Class A, Subclass 3.
Normalized rolled.
Hot rolled sheet: as rolled or pickled and oiled surface condition with mill edge. Cut edge is available upon request.
Hot rolled plate: as rolled surface condition and cut edges as default.
All SSAB Laser® products have been optimized for laser cutting, cold forming and welding.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.