SSAB Laser® 275C

General Product Description

SSAB Laser® 275C is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.

SSAB Laser® 275C meets and exceeds the requirements of S275J2C+N in EN 10025-2. Dual certification and CE marking are available upon request.

Dimension Range

Hide/Show specific columns Edit

Select columns to display

Delivery form	Thickness (mmin)	Width (mmin)	Length (mmin)
Hot rolled sheet as rolled	2.0 - 16.00.079 - 0.630	1000 - 186039.37 - 73.23	1000 - 1600039.37 - 629.92
Hot rolled sheet pickled and oiled	2.0 - 16.00.079 - 0.630	1000 - 183039.37 - 72.05	1000 - 1600039.37 - 629.92
Hot rolled plate as rolled	8.0 - 30.00.31 - 1.18	1000 - 330039.37 - 129.9	2000 - 1500078.74 - 590.55

Compare parameters

Select one parameter to compare

Thickness
(mmin)

Width
(mmin)

Length
(mmin)

Delivery form

Hot rolled sheet as rolled

Thickness
(mmin)

2.0 - 16.00.079 - 0.630

Width
(mmin)

1000 - 186039.37 - 73.23

Length
(mmin)

1000 - 1600039.37 - 629.92

Expand Collapse

Delivery form

Hot rolled sheet pickled and oiled

Thickness
(mmin)

2.0 - 16.00.079 - 0.630

Width
(mmin)

1000 - 183039.37 - 72.05

Length
(mmin)

1000 - 1600039.37 - 629.92

Expand Collapse

Delivery form

Hot rolled plate as rolled

Thickness
(mmin)

8.0 - 30.00.31 - 1.18

Width
(mmin)

1000 - 330039.37 - 129.9

Length
(mmin)

2000 - 1500078.74 - 590.55

Expand Collapse

Mechanical Properties

Hide/Show specific columns Edit

Select columns to display

Delivery form	Thickness (mmin)	Yield strength R_e (min MPa)	Tensile strength R_m (MPa)	Elongation A₈₀²⁾ (min %)	Elongation A₅³⁾ (min %)	Min. inner bending radius 90° t ≤ 6mm⁴⁾ (x t)	Min. inner bending radius 90° t ˃ 6mm⁴⁾ (x t)
Hot rolled sheet	2.0 - 16.00.079 - 0.630	275	410 - 560 ¹⁾	17	21	1.0	1.0
Hot rolled plate	8.0 - 30.00.31 - 1.18	275	410 - 560	—	21	—	1.0

Compare parameters

Select one parameter to compare

Thickness
(mmin)

Yield strength R_e
(min MPa)

Tensile strength R_m
(MPa)

Elongation A₈₀²⁾
(min %)

Elongation A₅³⁾
(min %)

Min. inner bending radius 90° t ≤ 6mm⁴⁾
(x t)

Min. inner bending radius 90° t ˃ 6mm⁴⁾
(x t)

Delivery form

Hot rolled sheet

Thickness
(mmin)

2.0 - 16.00.079 - 0.630

Yield strength R_e
(min MPa)

275

Tensile strength R_m
(MPa)

410 - 560 ¹⁾

Elongation A₈₀²⁾
(min %)

17

Elongation A₅³⁾
(min %)

21

Min. inner bending radius 90° t ≤ 6mm⁴⁾
(x t)

1.0

Min. inner bending radius 90° t ˃ 6mm⁴⁾
(x t)

1.0

Expand Collapse

Delivery form

Hot rolled plate

Thickness
(mmin)

8.0 - 30.00.31 - 1.18

Yield strength R_e
(min MPa)

275

Tensile strength R_m
(MPa)

410 - 560

Elongation A₈₀²⁾
(min %)

—

Elongation A₅³⁾
(min %)

21

Min. inner bending radius 90° t ≤ 6mm⁴⁾
(x t)

—

Min. inner bending radius 90° t ˃ 6mm⁴⁾
(x t)

1.0

Expand Collapse

The mechanical properties are tested transverse to the direction of rolling.

¹⁾ For thickness ˂ 3mm the tensile strength is 430-580 MPa.

²⁾ A₈₀ value applies for thicknesses < 3.00 mm.

³⁾ A₅ value applies for thicknesses ≥ 3.00 mm.

⁴⁾ The bending guarantee is valid for both longitudinal and transverse direction.

Impact Properties

Hide/Show specific columns Edit

Select columns to display

Min. impact energy for longitudinal testing, Charpy V 10x10 mm test specimens
40 J / -20 °C

Compare parameters

Select one parameter to compare

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens

40 J / -20 °C

Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

Chemical Composition (heat analysis)

Hide/Show specific columns Edit

Select columns to display

Delivery form	C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	CEV (max )
Hot rolled sheet	0.18	0.03	1.60	0.020	0.020	0.39
Hot rolled plate	0.19	0.03	1.60	0.020	0.020	0.42

Compare parameters

Select one parameter to compare

C
(max %)

Si
(max %)

Mn
(max %)

P
(max %)

S
(max %)

CEV
(max )

Delivery form

Hot rolled sheet

C
(max %)

0.18

Si
(max %)

0.03

Mn
(max %)

1.60

P
(max %)

0.020

S
(max %)

0.020

CEV
(max )

0.39

Expand Collapse

Delivery form

Hot rolled plate

C
(max %)

0.19

Si
(max %)

0.03

Mn
(max %)

1.60

P
(max %)

0.020

S
(max %)

0.020

CEV
(max )

0.42

Expand Collapse

All SSAB Laser® steels are aluminum-killed (Al ≥ 0.015%) and grain-refined. Additionally, niobium (Nb), vanadium (V), titanium (Ti) and/or boron (B) may be used as single alloying element or in any combination.

Tolerances

All SSAB Laser® products are delivered with SSAB Laser® tolerances, which means increased guarantees compared to corresponding EN standards. Detailed information is available on ssab.com.

Thickness

Hot rolled sheet: SSAB Laser® tolerances correspond to 2/3 of EN 10051 as default. Tighter tolerances are available upon request.

Hot rolled plate: SSAB Laser® tolerances correspond to 3/4 of EN 10029 as default.

Width

Hot rolled sheet: -0/+20 mm for mill edge sheet; -0/+2 mm for cut edge sheet. Tighter tolerances are available upon request.

Hot rolled plate: -0/+4-10mm depending on the thickness.

Length

Hot rolled sheet:

Hide/Show specific columns Edit

Select columns to display

Nominal length (mm)	Tolerance (mmin)
l ≤ 4000	- 0 / + 3- 0 / + 0.1
4000 ˂ l ≤ 6000	- 0 / + 4- 0 / + 0.2
6000 ˂ l ≤ 8000	- 0 / + 5- 0 / + 0.2
8000 ˂ l ≤ 13000	- 0 / + 6- 0 / + 0.2
13000 ˂ l ≤ 16000	- 0 / + 8- 0 / + 0.3

Compare parameters

Select one parameter to compare

Tolerance
(mmin)

Nominal length
(mm)

l ≤ 4000

Tolerance
(mmin)

- 0 / + 3- 0 / + 0.1

Nominal length
(mm)

4000 ˂ l ≤ 6000

Tolerance
(mmin)

- 0 / + 4- 0 / + 0.2

Nominal length
(mm)

6000 ˂ l ≤ 8000

Tolerance
(mmin)

- 0 / + 5- 0 / + 0.2

Nominal length
(mm)

8000 ˂ l ≤ 13000

Tolerance
(mmin)

- 0 / + 6- 0 / + 0.2

Nominal length
(mm)

13000 ˂ l ≤ 16000

Tolerance
(mmin)

- 0 / + 8- 0 / + 0.3

Hot rolled plate:

Hide/Show specific columns Edit

Select columns to display

Nominal length (mm)	Tolerance (mm)
2000 ˂ l ≤ 10000	- 0 / + 15
10000 ˂ l ≤ 15000	- 0 / + 20

Compare parameters

Select one parameter to compare

Tolerance
(mm)

Nominal length
(mm)

2000 ˂ l ≤ 10000

Tolerance
(mm)

- 0 / + 15

Nominal length
(mm)

10000 ˂ l ≤ 15000

Tolerance
(mm)

- 0 / + 20

Shape

Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.

Flatness

Hot rolled sheet: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

Hot rolled plate: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Delivery Conditions

Normalized rolled.

Surface and edge condition

Hot rolled sheet: as rolled or pickled and oiled surface condition with mill edge. Cut edge is available upon request.

Hot rolled plate: as rolled surface condition and cut edges as default.

Fabrication and Other Recommendations

All SSAB Laser® products have been optimized for laser cutting, cold forming and welding.

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Contact Information

www.ssab.com/contact

Get datasheet by email

General Product Description

Dimension Range

Select one parameter to compare

Comparison

Mechanical Properties

Select one parameter to compare

Comparison

Impact Properties

Select one parameter to compare

Comparison

Chemical Composition (heat analysis)

Select one parameter to compare

Comparison

Tolerances

Thickness

Width

Length

Hot rolled sheet:

Select one parameter to compare

Comparison

Hot rolled plate:

Select one parameter to compare

Comparison

Shape

Flatness

Surface Properties

Delivery Conditions

Surface and edge condition

Fabrication and Other Recommendations

Contact Information